Tools & Home Improvement

Float Switch w / 10 ft Cable, Septic System, Sump Pump, Water Tank

#ad
#ad
Sump Alarm, Inc 2359-3 #ad - This dual purpose float switch can be used for both emptying and filling operations. Directly controls pumps up to 1/2 hp at 120 Volts or 220 Volts - Up to 12 Amperes continuous or 13. 3 non continuous ac amperage - 12 VDC motor loads up to 13. 3 amps. Contact us for other dc applications - environmental friendly mercury free - suitable for use in septic, and potable water applications - Cable Weight is not to be used in Potable Water- Built with a Honeywell Micro switch, rated for 100, sump, 000 operations - Cable is Coated with PVC / Thermoplastic jacket - Internally Contains a Stainless Steel Ball - Includes adjustable counterweight.

Manufactured in argentina - Three year warranty - Constructed with non-toxic polypropylene - Float dimensions are 4. 1 in x 3 in x 1. 6 in 105 x 78 x 41 mm - rated for indoor or outdoor use: operating temperatures 32 to 140f 0 to 60c - ce marked, ip68 rated, tested to IEC 60730-1 08-2003 + IEC 60730-2-16 08-2001 - Reinforced Double O Ring Cable Entry Review online instructions at bit.

Float Switch w / 10 ft Cable, Septic System, Sump Pump, Water Tank #ad - Ly/floatswitch 3 meters 10 feet of cable, with adjustable counterweight. Normally open and normally closed empty and fill operations. Rated up to 250 volts operations at up to 13 Amps or 1/2 HP. 3 year warranty against manufacturing defects. Temperature ratings from 32f to 140F, and rated to IP68, with CE & IEC approvals.

More information about Sump Alarm, Inc 2359-3 #ad

Well Pump Wire Splice Kit, Submersible 3M Dual Wall Heat Shrink Tubing and Copper Connector for 4 Wires, 10#12#14 AWG.

#ad
#ad
USA Made SK4C101214 #ad - This wire splice kit comes with 4 x butt connectors and 4 x 3M clear dual wall heat shrink tubings that are suitable for connecting #10 #12 or #14 pump wires. Quality 3m tubings for groundwater and other water tight applications. Ideally using for splicing a submersible deep well water pump and other waterproof applications.

The inner wall of a special thermoplastic adhesive melts and flows when heat is applied. Instructions come with the kit. Upon cooling the adhesive solidifies, forming a permanent flexible, waterproof barrier. The tubing rapidly shrinks to a skin-tight fit, forcing the melted adhesive to flow and cover the substrate.

Well Pump Wire Splice Kit, Submersible 3M Dual Wall Heat Shrink Tubing and Copper Connector for 4 Wires, 10#12#14 AWG. #ad - . The tubing used in these kits was developed especially for groundwater applications. The clear tubing allows the additional advantage of seeing inside the splice. Made in the usa 4 x 3m tubings and 4 x butt connectors. Clear tubings allow you to see through inside the splice. Ideally for submersible deep well pump application.

Dual wall heat shrink Tubing and Pure Electrolytic Copper Connector.

More information about USA Made SK4C101214 #ad


Similar products



Baomain 4M Cable Float Switch Water Level Controller for Tank Pump

#ad
#ad
Baomain STUKK-2 #ad - Rated current/voltage: ac 108a 250v~104a 380V; Recommended Voltage: DC 24V. Shape: round; cable length : 4m / 13. 1ft; body size: 10 x 8 x 4. 5cm / 3. 9" x 3. 1" x 1. 8"l*w*t. Working temperature: 0°c~60°c; control range: 02m; electrical endurance: 50, 000 times Contacts: NO+NC. 4 x 3m tubings and 4 x butt connectors.

Clear tubings allow you to see through inside the splice. Dual wall heat shrink Tubing and Pure Electrolytic Copper Connector. Can sensor and regulate water level in barrel, sink or well. Non-toxic type can be used in house or factory. Product name: float switch Water Level Controller; Model: UK-221. Ideally for submersible deep well pump application.

Baomain 4M Cable Float Switch Water Level Controller for Tank Pump #ad - Quality 3m tubings for groundwater and other water tight applications. As the liquid level reaches upper or lower switching value, the controller contact will send out signals. Net weight : 742g; package content : 1 x Float Switch Water Level Controller.

More information about Baomain STUKK-2 #ad


Similar products



Packard C230B 2 Pole 30 Amp Contactor, 120 Voltage Coil

#ad
#ad
Packard C230B #ad - Net weight : 742g; package content : 1 x Float Switch Water Level Controller. 4 x 3m tubings and 4 x butt connectors. Working temperature: 0°c~60°c; control range: 02m; electrical endurance: 50, 000 times Contacts: NO+NC. Dual wall heat shrink Tubing and Pure Electrolytic Copper Connector. Quality 3m tubings for groundwater and other water tight applications.

Product name: float switch Water Level Controller; Model: UK-221. Clear tubings allow you to see through inside the splice. Coils have class b insulation. Includes lug, spade terminals, and covers. In accordance with u. L. Compatible with: c230b/ tjt30a120v2p/17325/pc230a/H230A/90-244. Contactors meet specifications for devices up to 600 VAC.

Packard C230B 2 Pole 30 Amp Contactor, 120 Voltage Coil #ad - Includes Lug, spade terminals, and covers. C230b/ tjt30a120v2p/17325/pc230a/h230a/90-244. Ideally for submersible deep well pump application. In accordance with U. L.

More information about Packard C230B #ad


Similar products



Franklin Electric C1 Septic Water High Head Submersible Effluent Pump, 20 GPM, 1/2 HP, 115V

#ad
#ad
Franklin Electric 20XC1-05P4-2W115 #ad - The pump's unique bottom suction design allows for maximum fluid drawdown without compromising durability or overall life, and it does not require the use of a flow induction sleeve. Product name: float switch Water Level Controller; Model: UK-221. Compatible with: c230b/ tjt30a120v2p/17325/pc230a/H230A/90-244.

Includes lug, spade terminals, and covers. 115v. Typical applications of the c1 series pump • gray water pumping • cistern tanks • aerator tanks • well pump • filtered effluent service water pumping • water reclamation projects such as pumping from rain catchment basins • aeration and other foundation or pond applications • agriculture and livestock water pumping Standard Features of the Franklin C1 Series Pumps • Supplied with a removable 5" base for secure and reliable mounting • Bottom suction design • Robust thermoplastic discharge head design resists breakage during installation and operation • Single shell housing design provides a compact unit while ensuring cool and quiet operation • Hydraulic components molded from high quality engineered thermoplastics • Optimized hydraulic design allows for increased performance and decreased power usage • All metal components are made of high grade stainless steel for corrosion resistance • Available with a high quality 115 V or 230 V, ½ hp motor • Fluid flows of 10, and 30 gpm, 20, with a max shut-off pressure of over 100 psi • Heavy duty 600 V 10 foot SJOOW jacketed lead 4 x 3m tubings and 4 x butt connectors.

Franklin Electric C1 Septic Water High Head Submersible Effluent Pump, 20 GPM, 1/2 HP, 115V #ad - Dual wall heat shrink Tubing and Pure Electrolytic Copper Connector. About the franklin electric c1 series cistern submersible Pumps Designed for use in gray water / filtered effluent service applications, the C1 Series cistern pump provides high performance and long life in less than ideal water conditions.

In accordance with u. L.

More information about Franklin Electric 20XC1-05P4-2W115 #ad


Similar products



The"SludgeBoss" Heavy Duty Float Switch for Use With Sewage, Suspended Solids and Viscous Liquids

#ad
#ad
Sump Alarm, Inc. #ad - Contact us for other dc applications - environmental friendly mercury free - suitable for use in septic, sump, rated for 100, and potable water applications - Built with a Honeywell Micro switch, 000 operations - Cable is Coated with PVC / Thermoplastic jacket - Internally Contains a Stainless Steel Ball - Manufactured in Argentina - Five year warranty - Constructed with non-toxic polypropylene - Float dimensions are 7 in long x 4.

5 inch diameter 180mm x 115mm- rated for indoor or outdoor use: operating temperatures 32 to 140f 0 to 60c, ip68 rated, okay to freeze - CE Marked, tested to IEC 60730-1 08-2003 + IEC 60730-2-16 08-2001 - Reinforced Double O Ring Cable Entry Review online instructions at bit. Ly/floatswitch2 4 x 3m tubings and 4 x butt connectors.

The"SludgeBoss" Heavy Duty Float Switch for Use With Sewage, Suspended Solids and Viscous Liquids #ad - Temperature ratings from -20f to 140F, and rated to IP68, with CE & IEC approvals. Bulletin no. Working temperature: 0°c~60°c; control range: 02m; electrical endurance: 50, 000 times Contacts: NO+NC. Directly controls pumps up to 1/2 hp at 120 Volts or 220 Volts - Up to 12 Amperes continuous or 13. 3 non continuous ac amperage - 12 VDC motor loads up to 13.

3 amps. Coils have class b insulation.

More information about Sump Alarm, Inc. #ad


Similar products



ECO-WORTHY 24V Deep Well Water Pump System: 1pc 24V DC Stainless Submersible Pump + 2pc 100W Poly Solar Panel + 1pc Charge Controller

#ad
#ad
ECO-WORTHY #ad - Package include: 1pc 20a controller 2pc 100w poly solar panel 1pc 24v stainless steel water Pump 24V Stainless Steel Water pump Model SPX-24-12 Cable10 feet 3m Voltage 24V DC Amps 5. 0 a flow ratelph/gph 12. 0lpm/3. 2gpm maximum lift 230 feet 70 meters maximum submersion 100 feet 30 Meters Material Stainless Steel Sheel Inlet 50 Mesh Stainless Steel Screen Outlet Port 1/2" 12.

7mm barbed fitting internal Bypass 105-110 PSI Max7. 2-7. 5bars motor permanent magnet thermally Protected Pump Design Positive Displacement 3 Chamber Diaphragm Pump Package Size 15. 15"x5. 39"x4. 52" 385*137*115mm 100w poly solar panel related power: 100W Voc: 206v vop: 17. 3v short circuit current Isc: 6. 88a working current Iop: 5.

ECO-WORTHY 24V Deep Well Water Pump System: 1pc 24V DC Stainless Submersible Pump + 2pc 100W Poly Solar Panel + 1pc Charge Controller #ad - 79a output tolerance: ±3% Temperate coefficient of Isc: 010+/- 001%/℃ temperate coefficient of Voc: - 038 +/-001%/℃ temperate coefficient of power Voc: -0

More information about ECO-WORTHY #ad


Similar products



10 Ft Piggyback Float Switch Cable, Septic System, Sump Pump, Water Tank

#ad
#ad
Sump Alarm, Inc SA-3100-10 #ad - 2 year warranty. In accordance with u. L. Clear tubings allow you to see through inside the splice. Temperature ratings from -20f to 140F, and rated to IP68, with CE & IEC approvals. Dual wall heat shrink Tubing and Pure Electrolytic Copper Connector. Working temperature: 0°c~60°c; control range: 02m; electrical endurance: 50, 000 times Contacts: NO+NC.

Direct connection of Sump Pump - Pumps to Empty. Directly controls pumps up to 1/2 hp at 120 Volts or 220 Volts - Up to 12 Amperes continuous or 13. 3 non continuous ac amperage - 12 VDC motor loads up to 13. 3 amps. Bulletin no. 3 year warranty against manufacturing defects. This means easy hookup to most any existing solar panels or wind generator systems.

10 Ft Piggyback Float Switch Cable, Septic System, Sump Pump, Water Tank #ad - Can be used with or without components such as voltage controllers. Can be used for livestock watering, ponds, irrigation, remote homes and cabins. New update:the solar charge controller has been update to 20A controller which has big LCD display, PWM battery charging, all adjustable parameter. 3 meters 10 feet of cable, Cable Ties, and Piggyback Connector.

Product name: float switch Water Level Controller; Model: UK-221.

More information about Sump Alarm, Inc SA-3100-10 #ad


Similar products



FRANKLIN ELECTRIC Pumptec water pump protection 1/3 HP to 1.5 HP 230/115V LOW YIELD WELLS

#ad
#ad
Franklin Electric #ad - Clear tubings allow you to see through inside the splice. Net weight : 742g; package content : 1 x Float Switch Water Level Controller. Coils have class b insulation. Model # 5800020610 Contactors meet specifications for devices up to 600 VAC. Ideally for submersible deep well pump application. Temperature ratings from 32f to 140F, and rated to IP68, with CE & IEC approvals.

508 "industrial control equipment". Direct connection of Sump Pump - Pumps to Empty. Usully ships out the same day - Ships USPS PRIORITY Mail. This means easy hookup to most any existing solar panels or wind generator systems. Can be used with or without components such as voltage controllers. Can be used for livestock watering, irrigation, ponds, remote homes and cabins.

FRANKLIN ELECTRIC Pumptec water pump protection 1/3 HP to 1.5 HP 230/115V LOW YIELD WELLS #ad - New update:the solar charge controller has been update to 20A controller which has big LCD display, PWM battery charging, all adjustable parameter. 3 meters 10 feet of cable, Cable Ties, and Piggyback Connector. In accordance with u. L. 230v or 115V.

More information about Franklin Electric #ad


Similar products



BRODY Float Switch Water Level Control Sensor with 10' Cable

#ad
#ad
Gas and Water FSK-6 #ad - Rated current/voltage: ac 108a 250v~104a 380V; Recommended Voltage: DC 24V. We are here to help. Any questions? please contact us through amazon. 20 gpm. 1/3hp to 1. 5 hp / 033-1. 5. 3 year warranty against manufacturing defects. In accordance with u. L. Ready to install. Contactors meet specifications for devices up to 600 VAC.

Ideally for submersible deep well pump application. Rated current: 16 AMPS. 508 "industrial control equipment". High reliability and particularly suitable for sewage/sump water pumps control on/off control for any kind of pumping system. Temperature ratings from -20f to 140F, and rated to IP68, with CE & IEC approvals.

BRODY Float Switch Water Level Control Sensor with 10' Cable #ad - Net weight : 742g; package content : 1 x Float Switch Water Level Controller. This level control is a float switch which sends automatic on/off signal. Working temp: 131ºf, protectioN GRADE: IP68. This means easy hookup to most any existing solar panels or wind generator systems. Can be used with or without components such as voltage controllers.

Can be used for livestock watering, ponds, irrigation, remote homes and cabins.

More information about Gas and Water FSK-6 #ad


Similar products



Banjo TF075 Polypropylene Bulkhead Tank Fitting, 3/4" NPT Female

#ad
#ad
Banjo Corporation #ad - Quality 3m tubings for groundwater and other water tight applications. Ideally for submersible deep well pump application. Model # 5800020610 Working temperature: 0°c~60°c; control range: 02m; electrical endurance: 50, 000 times Contacts: NO+NC. 5 year field Failure Warranty. This means easy hookup to most any existing solar panels or wind generator systems.

Can be used with or without components such as voltage controllers. Can be used for livestock watering, irrigation, ponds, remote homes and cabins. New update:the solar charge controller has been update to 20A controller which has big LCD display, PWM battery charging, all adjustable parameter. 3 meters 10 feet of cable, Cable Ties, and Piggyback Connector.

Banjo TF075 Polypropylene Bulkhead Tank Fitting, 3/4" NPT Female #ad - Temperature ratings from 32f to 140F, and rated to IP68, with CE & IEC approvals. Coils have class b insulation. Contactors meet specifications for devices up to 600 VAC. Working temp: 131ºf, protectioN GRADE: IP68. Range -20 degrees to 150 degrees F, Color Black 4 x 3m tubings and 4 x butt connectors. Rated up to 13 amps or 1/2 HP.

More information about Banjo Corporation #ad


Similar products