Tools & Home Improvement

Irwin Tools 80107 No. 7 General Purpose HSS Wire Gauge Jobber Length, Pack of 6

#ad
#ad
IRWIN 80107 #ad - Constructed of m-2 high speed steel for the best combination of strength, heat resistance and wear resistance, this bit will get the job done quickly. Standard 118 degree point. 7 gen. For use in wood, metal and plastic. The irwin tools 80107 No. Constructed of m-2 high speed steel for the best combination of strength, heat resistance and wear resistance.

The standard 118 degree point helps keep the bit from walking and allows it to start quickly. Purpose hss wire gauge, jobber length - Pack of 6 is ideal for basic drilling applications in metal, wood and plastic.

More information about IRWIN 80107 #ad

20 NC - Irwin Tools 2620- 3 Piece High Carbon Steel- Tap 1/4"

#ad
#ad
IRWIN 2620 #ad - High carbon Steel Construction for Durability. Each set includes 1 taper, bottoming and plug tap in the specified size. Ideal for auto repair and machinery convenient plastic pouch puts all the necessary taps at your finger tips Each set includes 1 taper bottoming and plug tap in the specified size High Carbon Steel Construction for Durability Ideal for auto repair and machinery.

Convenient plastic pouch puts all the necessary taps at your finger tips.

More information about IRWIN 2620 #ad


Similar products



Kodiak Cutting Tools KCT202717 USA Made 1/4-20 Hand Threading Tap Set, Includes Taper, Plug and Bottom Taps, Ground Threads, High Speed Steel, H3 Limit, 4 Flute, 1/4" Diameter x 20 TPI Pack of 3

#ad
#ad
Kodiak Cutting Tools KODIAK202717 #ad - 1 thread Length. 2-1/2 overall Length. 1/4-20 hand threading Tap. 255" shank 1 thread length 2-1/2" overall Length 4 Flute Standard Hand Threading Tap. Convenient plastic pouch puts all the necessary taps at your finger tips. Made in the USA. 4 flutes. High carbon Steel Construction for Durability. Ideal for auto repair and machinery.

255 shank Diameter. Each set includes 1 taper, bottoming and plug tap in the specified size.

More information about Kodiak Cutting Tools KODIAK202717 #ad


Similar products



Vermont American 20268 High Carbon Steel NC Fractional Bottoming Tap - 1/4-inch by 20

#ad
#ad
Vermont American 20268 #ad - Made in the USA. 1 thread Length. High carbon steel fractional bottoming taps are ideal for cutting right-hand internal threads. 4 flutes. Four flute design on all taps ensures fast and easy chip clearance. Required drill size is permanently etched on the tool for quick and easy reference. 255 shank Diameter. Cut cleaner and more accurate threads with this high carbon steel fractional screw bottoming taper tap.

Bottoming taps have 1 - 1/2 threads chamfered for tapping to the bottom of a hole. 1/4"-20nc bottoming tap cuts threads to the bottom of a drilled hole. Its ideal for cutting right-hand internal thread. Also, ensures a fast and quality performance! Ideal for auto repair and machinery. Convenient plastic pouch puts all the necessary taps at your finger tips.

Vermont American 20268 High Carbon Steel NC Fractional Bottoming Tap - 1/4-inch by 20 #ad - 2-1/2 overall Length. High carbon Steel Construction for Durability. Each set includes 1 taper, bottoming and plug tap in the specified size.

More information about Vermont American 20268 #ad


Similar products



YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 1/4"-20 Thread Size, H3 Tolerance

#ad
#ad
YG-1 Tool Company F4403 #ad - 255 shank Diameter. Yg-1 f4 series vanadium alloy HSS spiral flute tap for multi-purpose. Round shanks allow use with a wide variety of toolholding systems. Made in the USA. 0625-inches thread length. 0625-inches thread length. 2-1/2 overall Length. Bottoming taps have 1 - 1/2 threads chamfered for tapping to the bottom of a hole.

High carbon steel fractional bottoming taps are ideal for cutting right-hand internal threads. Ideal for auto repair and machinery. High carbon Steel Construction for Durability. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge.

YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 1/4"-20 Thread Size, H3 Tolerance #ad - Excellent for low carbon/free machining carbon steel, medium to high carbon steel. Four flute design on all taps ensures fast and easy chip clearance. Required drill size is permanently etched on the tool for quick and easy reference. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.

High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. When run in a counterclockwise direction right-hand cut spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

More information about YG-1 Tool Company F4403 #ad


Similar products



Forney 20857 Tap Magic Industrial Pro Cutting Fluid, 4 oz

#ad
#ad
Forney 20857 #ad - 2-1/2 overall Length. 255 shank Diameter. 4-ounces 0118l of cutting fluid. 4 flutes. Non-spray cutting fluid. Convenient plastic pouch puts all the necessary taps at your finger tips. Completely biodegradable and ecologically safe. Were committed to your success regardless of location size or needs. This warranty does not cover any product that has been subject to misuse, neglect, negligence or accident, or that has been used in any way contrary to the purpose intended.

Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. High carbon steel fractional bottoming taps are ideal for cutting right-hand internal threads. Claims for warranty must be made within 90 days of the date of purchase. 0

Forney 20857 Tap Magic Industrial Pro Cutting Fluid, 4 oz #ad - 625-inches thread length. Apply directly on the work surface. If you've got metal working questions, we've got answers. 1 thread Length. Founded in 1932, 000 products for the hardware, automotive, Forney offers more than 5, farm & ranch and do-it-yourself markets. Made in the USA.

More information about Forney 20857 #ad


Similar products



Irwin Tools 80125ZR No. 25 General Purpose HSS Wire Gauge Jobber Length, Pack of 6

#ad
#ad
IRWIN 80125ZR #ad - 255 shank Diameter. 1 thread Length. Constructed of m-2 high speed steel for the best combination of strength, heat resistance and wear resistance. Round shanks allow use with a wide variety of toolholding systems. 2-1/2 overall Length. 25 gen. Constructed of m-2 high speed steel for the best combination of strength, heat resistance and wear resistance, this bit will get the job done quickly.

Made in the USA. High carbon steel fractional bottoming taps are ideal for cutting right-hand internal threads. Ideal for auto repair and machinery. Non-spray cutting fluid. For use in wood, metal and plastic. Apply directly on the work surface. When run in a counterclockwise direction right-hand cut spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

Irwin Tools 80125ZR No. 25 General Purpose HSS Wire Gauge Jobber Length, Pack of 6 #ad - Use on ferrous metals and non-ferrous alloys. Bottoming taps have 1 - 1/2 threads chamfered for tapping to the bottom of a hole. Purpose hss wire gauge, jobber length - Pack of 6 is ideal for basic drilling applications in metal, wood and plastic. Four flute design on all taps ensures fast and easy chip clearance.

Required drill size is permanently etched on the tool for quick and easy reference.

More information about IRWIN 80125ZR #ad


Similar products



WIDIA 2749818 GTD14024 5303 Tap, Full Bottom Chamfer, Right Hand Cut, 4 Flutes, 1/4-20, HSS, Uncoated

#ad
#ad
WIDIA Products Group 2749818 #ad - High carbon steel fractional bottoming taps are ideal for cutting right-hand internal threads. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. Widia-gtd 5303/2303 series taps offer a wide range of options for tapping through and blind holes across multiple material types.

When run in a counterclockwise direction right-hand cut spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Constructed of m-2 high speed steel for the best combination of strength, heat resistance and wear resistance. Apply directly on the work surface. Convenient plastic pouch puts all the necessary taps at your finger tips.

WIDIA 2749818 GTD14024 5303 Tap, Full Bottom Chamfer, Right Hand Cut, 4 Flutes, 1/4-20, HSS, Uncoated #ad - Store chips in their flutes during threading, which protects the work piece. 255 shank Diameter. Non-spray cutting fluid. Multiple chamfer options. For customers who machine small lots & maintenance shops. Round shanks allow use with a wide variety of toolholding systems. High carbon Steel Construction for Durability.

2-1/2 overall Length.

More information about WIDIA Products Group 2749818 #ad


Similar products



Vermont American 21666 Size 1/4 x 20 NC Tap No 7 Drill Bit Combo

#ad
#ad
Vermont American 21666 #ad - Convenient plastic pouch puts all the necessary taps at your finger tips. 4 flutes. High carbon Steel Construction for Durability. 1 thread Length. Vermont american 21666 tap 1/4-20 #7 Drill Ideal for auto repair and machinery. When run in a counterclockwise direction right-hand cut spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

Use for tapping, threading, drilling and reaming. Non-spray cutting fluid. Round shanks allow use with a wide variety of toolholding systems. Can be used in general machinery or CNC tapping applications. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge.

Vermont American 21666 Size 1/4 x 20 NC Tap No 7 Drill Bit Combo #ad - Constructed of m-2 high speed steel for the best combination of strength, heat resistance and wear resistance. High carbon steel tap and drill bit combo sets are ideal for drilling the proper hole size and cutting internal threads. Recommended drill size is permanently marked on each tap. Most taps feature four-flute design for maximum chip clearance.

2-1/2 overall Length. 255 shank Diameter. High carbon steel fractional bottoming taps are ideal for cutting right-hand internal threads.

More information about Vermont American 21666 #ad


Similar products



Irwin Tools 3019016B 1/4-Inch Black and Gold HSS 135-Degree Jobber Length, Pack of 12

#ad
#ad
IRWIN 3019016B #ad - Straight-flute taps manufactured with HSS for use in through and blind hole applications. Use on ferrous metals and non-ferrous alloys. Ideal for auto repair and machinery. 0625-inches thread length. When run in a counterclockwise direction right-hand cut spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

Constructed of m-2 high speed steel for the best combination of strength, heat resistance and wear resistance, this bit will get the job done quickly. Store chips in their flutes during threading, which protects the work piece. Made in the USA. Non-spray cutting fluid. Can be used in general machinery or CNC tapping applications.

Irwin Tools 3019016B 1/4-Inch Black and Gold HSS 135-Degree Jobber Length, Pack of 12 #ad - Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. 1 thread Length. For use in wood, metal and plastic. Standard 118 degree point. High carbon steel tap and drill bit combo sets are ideal for drilling the proper hole size and cutting internal threads.

Recommended drill size is permanently marked on each tap. Most taps feature four-flute design for maximum chip clearance.

More information about IRWIN 3019016B #ad


Similar products



Vermont American 20068 1/4-Inch 20 High Carbon Steel Machine Screw Plug Tap

#ad
#ad
Vermont American 20068 #ad - High carbon steel tap and drill bit combo sets are ideal for drilling the proper hole size and cutting internal threads. Recommended drill size is permanently marked on each tap. Most taps feature four-flute design for maximum chip clearance. Standard 118 degree point. Made in the USA. 255 shank Diameter. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge.

For use in wood, metal and plastic. Store chips in their flutes during threading, which protects the work piece. Constructed of m-2 high speed steel for the best combination of strength, heat resistance and wear resistance. Ideal for cutting right-hand internal threads. When run in a counterclockwise direction right-hand cut spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

Vermont American 20068 1/4-Inch 20 High Carbon Steel Machine Screw Plug Tap #ad - Bottoming taps have 1 - 1/2 threads chamfered for tapping to the bottom of a hole. 2-1/2 overall Length. Multiple chamfer options. 0

More information about Vermont American 20068 #ad


Similar products